Choose which Sure Signal device you have to see how to reset it.
Sure Signal version 1
Version 1 devices have four lights on the front.
Make sure you keep the reset button held down throughout these steps:
- Press and hold down the reset button
- After 30 seconds, the lights will flash once each in sequence – keep holding the reset button down
- Still holding down the reset button, unplug the power cable from the device for at least 10 seconds
- Still holding down the reset button, plug the power cable back into the device
- Wait for the lights to flash in sequence again
- You can now release the reset button
Sure Signal version 2
Version 2 devices have 3 lights on the front.
Here’s how to reset yours:
- Press and hold down the reset button
- After 30 seconds, the lights will flash in sequence, then turn off
- Release the reset button
- The device will now go into setup mode, which can take anywhere from 20 minutes to 6 hours to complete – it depends on your connection speed
Sure Signal version 3
Version 3 devices are the plugin kind.
Here’s how to reset yours:
- Press and hold down the reset button
- After five seconds, release – if you hold the button down longer, the device will turn off
- The device will now go into setup mode, which can take anywhere from 20 minutes to 6 hours to complete – it depends on your connection speed
None of this help?
Start a chat with us.